大型順送型、オートマチックトランスミッション部品用金型・試作 Large progressive dies/dies for automatic transmissions
加圧1200ton、型重量20tonまでが製作・トライ可能
板厚の厚い製品(9mmまで)の金型が製作・トライ可能
板鍛造の実績も多数
お客様の金型保管、金型メンテナンス、少量生産、緊急生産
We do production using various metal stamping machines such as our 1200ton progressive press.
Please feel free to contact us.
Die Size(MAX) | L4000mm * W1900mm *DH1150mm |
Die Weight(MAX) | 40ton(Each upper and lower die is less than 20 ton) |
Laod(MAX) | 1200ton |
Feeder | With Un-coiler and leveler |
Coil Size | ID 508mm / OD 1400mm or less Weight 7,000kg(MAX) |
When your stamping machine is unavailable, i.e. in trouble, you may bring your dies to us and we do production on your behalf until the machine comes back to normal.
We do production for the parts that are small volume but must be produced on a regular basis.
Since we do production during our stamping machine’s free time, the production volume should be less than 8 hours per month operation.
“Die Trunk Room” is a service which we store your dies in our facility.
It is suitable for “Spare Parts” which regular production ended but small production continues on a irregular basis for car repair and maintenance.
It may be hard to schedule production for the company which runs production on a regular basis like you.
We do such production on your behalf.
For example,
(1) As a die warehouse
(2) Store and Production
(3) Store , Production and Maintenance